SYNTHETIC ALUMINIUM PAINT
Rockfort Synthetic Aluminium Paint is a Oleoriseneous based general purpose Aluminium paint supplied in a Dual Packing Medium and Paste separately. The ready mixed paint obtained by mixing the medium and paste is used for protective and decorative purposes, particularly where a heat reflecting surface is required. Aluminium paint is used as a finishing coat on interior and exterior steel work exposed to moderate corrosive environment where light reflection and moderate heat resistance is required. It has good water resistance, scratch hardness up to 1500 grams and shows no signs of cracking, blistering, flecking, peeling when exposed to dry heat up to 250 degree centigrade.
TECHNICAL DATA:-
Finish | : | Smooth and lustrous matt metallic finish |
Colours | : | Aluminium |
Drying | : | Surface dry - Two hours Tack free - Three hours Hard dry - Twenty four hours |
Stowing | : | Can be cured at 120 degree centigrade for 25 to 30 minutes to get well dried and cured film. |
Coverage | : | By Brushing -20 to 25 m2 per Litre per coat By Spray- 16 to 20 m2 per Litre per coat |
Heat Resistance | : | Dry heat up to 250 degree heat |
Scratch Hardness | : | Up to 1500 grams |
Recommended film thickness | : | Twenty microns |
SURFACE PREPARATION:-
Clean the surface to be painted free from dust and other foreign material, generally no primer is required, If any preliminary rust particles are present use appropriate pretreatment chemical to remove. On clean and dry surface apply single or two coats.
APPLICATION DETAILS:-
Generally No thinner is recommended since the paint as such itself is supplied in brushing consistency. If further thinning is necessary Rockfort enamel Thinner ET 101 can be used, to apply by brush or spray.
PACKING - 20, 4 ltr
SAFETY
Avoid contact with skin and eyes and exposure to naked light. Provide good ventilation during spraying and drying.