Rockfort Semi Glossy Synthetic Enamels are air drying synthetic Enamels based on synthetic resins and selected weather resistant pigments. Rockfort Semi glossy Finishes are best suited for decoration and protection of all internal and external surfaces requiring a weather resistant semi glossy finish. This high quality semi- glossy finishes have excellent colour retention, exterior durability and water resistance. Its key physical properties are

• High opacity
• Excellent brush ability and flow
• Used for Exterior and Interior use
• Good scratch and mar resistance

TECHNICAL DATA:-

Finish	:	smooth and glossy
Colours	:	available in selected shades only.
Coverage	:	By Brush - 15 to 20 m2 per ltr per coat By Spray - 11 to 15 m2 per ltr per coat
Drying Time	:	Surface dry - 1 Hrs Tack free dry - 3 Hrs Hard dry - Over night
Viscosity	:	120 + 10 sec / B4 @ 30. C
Flash point	:	Above 30. C

SURFACE PREPARATION:-

For metal surface clean to remove oil, grease and other surface imprecated and properly prime the metal surfaces using Rockfort metal primer, One Coat of Knifing Putty can also be used to remove surface imperfections. For Mansonary Surfaces use Alkali Resistant Water base White primer before applying the finishing Coat

APPLICATION DETAILS MEHTODS, CONDITIONS:-

Tinner: Dilute with Rockfort Enamel thinner ET 101 or Genuine Turpentine

Application Method: By Air Spray, Airless Spray, Brushing. Generally Two Coats are recommended, Second Coat can be applied after five to six hours of first coat.

Dilion ratio:

• For Air Spray - 5 to 15%
• For Brushing - 0 to 10%

Indicated film thickness: 50 Micron / 2 miles in 2 coats.

PACKING - 20, 4 ltr